23.5 Bottom of the appliance
Always empty the water out of the drain circuit.
Remove the fasteners that block the bottom of the unit.
23.5.1 From the bottom of the appliance, you can access
1.
Drain circuit
2.
Drain pump
3.
Tub drain pipe
4.
Shock absorbers
Set down the appliance in a horizontal position on a protected surface
in order not to damage the unit.
23.5.2 Drain circuit
Filter body.
Remove the panel.
Disconnect the connectors from the discharge pump (blue arrow).
Slacken the clamps that hold the main drain pipe and drain pipe that
connects the welded tub (red arrows).
Technical Support - DMM
118/124
1
2
3
4
599 75 58-67 Rev.04