Aesthetics Z3 / Z4; Styling Z3; General Characteristics - Electrolux EWM09311 Service Manual

12 AESTHETICS Z3 / Z4

13 STYLING Z3

13.1 General characteristics

The EWM09311 / EWX13611 electronic control system consists of two circuit boards:
 Control/display board in a plastic casing fitted
to the control panel (the figure illustrates the
individual board and the board assembly
consisting of board, casing and diffuser).
 Main board, positioned in the bottom rear of the appliance. It powers the electrical components and
receives commands from the display board.
Main board EWX13611
Programme selector
No. buttons
No. LEDs
Serial port
Power supply voltage
Washing type
Rinsing system
Motor
spin speed
Anti-unbalancing system
Water fill
Detergent dispenser
Control of water level in the tub
Door safety interlock
Heating element heat output
Temperature check
Buzzer
Technical Support - DMM

15 positions without main switch (incorporated in the circuit board)

maximum 7 (3 options + 1 start/pause + 1 delayed start + 1 Spin
+ 1 Temperature)

maximum 14 (13 green LEDs + 1 red LED)+ 1 display

DAAS-EAP communication protocol up to 230400 baud

220/240V

50/60 Hz (configurable)

Traditional

Traditional

Collector, with tachometric generator (Universal)
600 ÷ 1,400 rpm


AGS

1 solenoid valve with 1 inlet – 2 outlets

2 compartments: wash, conditioners

Electronic/analogue pressure switch

Traditional (with PTC)

1750W with thermal fuses incorporated

NTC probe incorporated in the heating element

Traditional incorporated in the PCB
43/124
Main board EWM09311
599 75 58-67 Rev.04