Table of Contents
Advertisement
13.3 Configuration of control panel Z3
The wash programmes, the functions of the selector dial (where featured) and the individual buttons vary
according to the model, since these are determined by the configuration of the appliance.
13.3.1 Programme selector (S1)
The selector is formed by a linear potentiometer. The fifteen positions are
determined by a plastic structure that is secured around the potentiometer.
There is no ON/OFF switch.
The first position is for the OFF function, where the current programme is
cancelled and all the LEDs on the display board are turned off.
The plug must be removed from the mains socket to cut the power to the
appliance.
The various positions of the selector may be configured in order to perform the
various washing programmes (e.g. water level, drum movement, No. of rinses
and the washing temperature to be selected according to the type of laundry).
The selector can be turned both clockwise and anti-clockwise.
For each programme, the compatible options and other parameters are defined.
The programme temperature is selected using the relevant button.
13.3.2 Programme configuration
The table below lists the parameters that can be used to define the washing programmes.
Types of fabric
Special programmes
Temperature
Spin
Options (Normal/Possible)
Programme phases
Technical Support - DMM
L1
L2
L3
L4
L5
P1
S1
Cotton/linen, Synthetic fabrics, Delicates, Wool, Hand-wash,
Shoes, Jeans, Duvet, Silk.
Cotton/linen + pre-wash, Soak, Miniprogramme, Easy-Iron,
Conditioner, Rinse, Drain, Spin, Economy.
Normal, Minimum, Maximum: the initial temperature is the one
proposed for the washing programme.
Normal, Minimum, Maximum.
Rinse Hold, Pre-wash, Extra rinse, Easy-Iron, Economy (energy
label), Normal, Super quick, Reduced spin speed, No spin.
Pre-wash, Wash, Rinses, Spin, Delayed start.
45/124
L6
L7
L10 L11
L9
L8
P4
P5
P2
P3
P7
L12
P6
599 75 58-67 Rev.04
Advertisement
Table of Contents
