Omconfig Rac Network; Example Command - Dell Command Line Interface User Manual

omconfig rac network

Use the omconfig rac network command to specify network parameter values. Table 7-7 shows the valid
parameters for the command.
Table 7-7. omconfig rac network
name=value pair
ipaddr=<text>
subnetmask=<text>
gateway=<text>
nicenable=true | false
dhcpenable=true | false
smtpaddr=<text>
smtpenable=true | false
dialinenable=true | false
dialindhcpenable=true | false
dialinpaddr=<text>
dialinauthtype=any | encrypted

Example Command

The following example sets one name=value pair. Type:
omconfig rac network ippaddr=123.169.555.216
The following message appears:
Command Successful. Please reset RAC card!
Description
Sets the IP address, which must be specified in dotted-decimal notation.
Sets the subnet mask, which must be specified in dotted-decimal notation.
Sets the gateway, which must be specified in dotted-decimal notation.
true: Enables the NIC.
false: Disables the NIC.
true: Enables the DHCP .
false: Disables the DHCP .
Sets the SMTP address, which must be specified in dotted-decimal notation.
true: Enables the SMTP .
false: Disables the SMTP .
true: Enables the dial-in communications.
false: Disables the dial-in communications.
true: Enables the dial-in dynamic host configuration protocol (DHCP).
false: Disables the dial-in dynamic host configuration protocol (DHCP).
Sets the base IP address, which must be specified in dotted-decimal notation.
Sets the type of authentication required.
omconfig rac: Managing the Remote Access Controller
127