Dell Command Line Interface User Manual page 42

---------------
Power Supplies
----------------
Settings
Enable: Informational, Warning and Critical
Disable: None
-----------
Fans
-----------
Settings
Enable: Critical
Disable: Informational and Warning
The full report lists the settings for all components in your system for which events can be generated.
To view the status for components of a specific type, use the omreport system events type=<component
name> command. This command displays a summary of each component in your system for which
events can be generated. Table 3-6 shows the events displayed for various component types.
NOTE:
Some component types may be unavailable on your system.
Table 3-6. System Events by Component Type
name=value pair
type=accords
type=battery
type=currents
type=fanenclosures
type=fans
type=intrusion
type=log
type=memory
type=powersupplies
type=redundancy
type=temps
type=volts
42
omreport: Viewing System Status Using the Instrumentation Service
Description
Reports events for AC power cords.
Reports events for batteries
Reports events for fan amperage probes.
Reports events for fan enclosures.
Reports events for fans.
Reports events for chassis intrusion.
Reports events for logs.
Reports events for memory.
Reports events for power supplies.
Reports events for redundancy.
Reports events for temperatures.
Reports events for voltages.