Omconfig Create Virtual Disk - Dell Command Line Interface User Manual

omconfig Create Virtual Disk

The online help provides additional information about creating virtual disks.
The omconfig syntax for creating a virtual disk has several parameters. You must specify the
following parameters:
• Controller (controller=id)
• RAID level (raid=<c| r0| r1| r1c| r5| r10| r50>)
• Size (size=<number | max | min>)
• Physical disk is specified as either:
pdisk=connector:enclosureID:portID
or
pdisk=connector:targetID
Storage Management supplies default values for any of the other parameters that you do not specify.
Complete Syntax
omconfig storage controller action=createvdisk controller=id raid=<c|
r0| r1| r1c| r5| r10| r50> size=<number | max | min> pdisk=<PDISKID>
[stripesize=< 2kb| 4kb| 8kb| 16kb| 32kb| 64kb| 128kb>] [cachepolicy=<d |
c>] [readpolicy=<ra | nra | ara | rc| nrc>] [writepolicy=<wb| wt| wc| nwc
| fwb>] [name=<string>] [spanlength=<n>]
Parameter Specification for Create and Reconfigure Virtual Disk
The following sections indicate how to specify the omconfig storage controller action=createvdisk
parameters.
controller=id Parameter (Required)
raid=<c| r0| r1| r1c| r5| r10| r50> Parameter (Required)
size=<number | max | min> Parameter (Required)
pdisk=<connector:targetID,connector:targetID,.....> Parameter (Required)
[stripesize=< 2kb| 4kb| 8kb| 16kb| 32kb| 64kb| 128kb>] Parameter (Optional)
[cachepolicy=<d | c>] Parameter (Optional)
[readpolicy=<ra| nra| ara| rc| nrc>] Parameter (Optional)
[writepolicy=<wb| wt| wc| nwc | fwb>] Parameter (Optional)
[name=<string>] Parameter (Optional)
[spanlength=<n>] Parameter (Optional)
150
Using the Storage Management Service