Table of Contents
Advertisement
omreport Virtual Disk Status
Table 8-14. omreport Virtual Disk Commands
Required Command Levels (1, 2, 3) Optional name=value pairs
omreport storage vdisk
omconfig Global Commands
The following sections provide the omconfig command syntax required to execute the global commands.
When executed, these commands apply to all controllers. These global commands also correspond to the
global tasks provided by the Storage tree view object's Information/Configuration subtab.
Table 8-15. omconfig Global Commands
Required Command Levels (1, 2, 3)
omconfig storage globalinfo
omconfig Global Enable Smart Thermal Shutdown
By default, the operating system and server shut down when the PV220S and PV221S enclosures reach a
critical temperature of 0 or 50
and PV221S enclosures, however, you can specify that only the enclosure and not the operating system
and server be shut down when the enclosure reaches a critical temperature of 0 or 50
that only the enclosure be shutdown during excessive temperatures is known as Smart Thermal
Shutdown. See the online help for more information.
Use the following omconfig command syntax to enable smart thermal shutdown.
Complete Syntax
omconfig storage globalinfo action=enablests
144
Using the Storage Management Service
controller=id
where id is the controller number.
For example: controller=0.
controller=id vdisk=id
where id is the controller number
and the virtual disk number. For
example: controller=0 vdisk=1.
Optional name=value pairs
action=enablests
action=disablests
action=globalrescan
°
Celsius. If you have implemented
Use
Displays property information for
all virtual disks on all controllers.
Displays all virtual disks on the
specified controller.
Displays the specified virtual disk
on the controller.
redundancy on the PV220S
connector
°
Celsius. Specifying
Advertisement
Table of Contents
