Omreport Fan Status - Dell Command Line Interface User Manual

Table 8-9. omreport Temperature Probe Commands
Required Command Levels (1, 2, 3)
and name=value pair

omreport Fan Status

Table 8-10. omreport Fan Status
Required Command Levels (1, 2, 3)
and name=value pair
omreport storage enclosure
Optional name=value pairs
controller=id enclosure=
<ENCLOSUREID>
info=temps index=n
where id is the controller number
and the enclosure number and "n" is
the number of a temperature probe.
For example: controller=0
enclosure=2 info=temps index=1
Optional name=value pairs
controller=id enclosure=
<ENCLOSUREID> info=fans
where id is the controller number
and the enclosure number.
For example: controller=0
enclosure=2
NOTE:
For SCSI controllers, the ID
specified in enclosure=
<ENCLOSUREID> is the connector
number and for Serial Attached
SCSI (SAS) controllers, ID is the
connectorNumber:EnclosureIndex.
controller=id enclosure=
<ENCLOSUREID>
info=fans index=n
where id is the controller number
and the enclosure number and "n"
is the number of a fan.
For example: controller=0
enclosure=2 info=fans index=1
Use
Displays the specified
temperature probe.
Use
Displays property information for
all enclosures attached to the system.
Displays the fans for the specified
enclosure.
Displays the specified fan.
Using the Storage Management Service
141