Omconfig Clear Foreign Configuration; Omconfig Set Patrol Read Mode; Omconfig Start Patrol Read - Dell Command Line Interface User Manual

Example Syntax
For example, to import and recover foreign configurations on controller 1, enter:
omconfig storage controller action=importrecoverforeignconfig
controller=1

omconfig Clear Foreign Configuration

Use the following omconfig command syntax to clear or delete all virtual disks that reside on physical
disks that are newly attached to the controller.
Complete Syntax
omconfig storage controller action=clearforeignconfig controller=id
where id is the controller ID as reported by the omreport storage controller command.
Example Syntax
For example, to clear foreign configurations on controller 1, enter:
omconfig storage controller action=clearforeignconfig controller=1

omconfig Set Patrol Read Mode

Use the following omconfig command syntax to set the patrol read mode for the controller.
Complete Syntax
omconfig storage controller action=setpatrolreadmode controller=id
mode=manual|auto|disable
where id is the controller ID as reported by the omreport storage controller command.
Example Syntax
For example, to set the patrol read on controller 1 to manual mode, enter:
omconfig storage controller action=setpatrolreadmode controller=1
mode=manual

omconfig Start Patrol Read

Use the following omconfig command syntax to start the patrol read task on the controller.
Complete Syntax
omconfig storage controller action=startpatrolread controller=id
where id is the controller ID as reported by the omreport storage controller command.
Using the Storage Management Service
157