Customizing The Scanner Settings; Using A Button On The Scanner To Start Scanning - Fujitsu 6240 - fi - Document Scanner Operator's Manual

Chapter 5 Various Ways to Scan

5.5 Customizing the Scanner Settings

Using a Button on the Scanner to Start Scanning

The [Scan/Stop] and [Send to] buttons on the operator panel
can be configured to perform scanning by simply pressing one
of these buttons.
To configure this setting, you first need to assign an
application to be launched from each button.
Computer setup
1
Confirm that the scanner is connected to the computer,
then turn on the scanner.
For details, refer to "Connecting the Cables" in Getting Started.
2
Select the [Start] menu
The [Control Panel] dialog box appears.
3
Click [View devices and printers].
The [Devices and Printers] dialog box appears.
4
Right-click on the scanner icon, and select [Scan
properties] from the displayed menu.
The properties dialog box of the scanner appears.
[Control Panel].
5
Click the [Events] tab and select an event.
From the [Select an event] drop-down list, select an event from which
you want to launch an application.
In this function, the following events can be specified:
[Scan Button] (press the [Scan/Stop] button)
[Send to 1] to [Send to 9] (press the [Send to] button while a
number from 1 to 9 is displayed on the Function Number
Display)
TOP
Contents
Index
Introduction
Scanner
Overview
How to Load
Documents
Configuring the
Scan Settings
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Replacing the
Consumables
Troubleshooting
Operational
Settings
Appendix
Glossary
101