Removing Punch Holes - Fujitsu 6240 - fi - Document Scanner Operator's Manual

Chapter 5 Various Ways to Scan

Removing Punch Holes

You can remove punch holes from the output scanned image.
Original
Punch holes cannot be removed when:
The holes are not aligned along the edge of the document
The size and gap between the holes vary
The hole is near the edge of the document
The document is not rectangular
The document has a dark background color
There are characters/pictures over the edge or the holes
[Automatic Page Size Detection] is specified and the
scanned document is larger than the selected paper size
[Black Background] is specified and the scanned document
does not match with the selected paper size.
1
Load the documents.
For details, refer to "Chapter 2 How to Load Documents" (page
2
Start up ScandAll PRO and select the [Scan] menu
[Scanner Setting].
The [TWAIN Driver (32)] dialog box appears.
If the [TWAIN Driver (32)] dialog box does not appear,
check the setting in ScandAll PRO by selecting the [Tool]
menu [Preferences] to open the [Setup] dialog box,
then confirm that [TWAIN] is selected for [Device Driver]
in the [Scan] tab.
Output image
37).
3
Click the [Option] button.
The [Option] dialog box appears.
4
Click the [Rotation] tab and select [Automatic Page Size
Detection] or [Black Background] in the [Automatic Size
and Skew detection] drop-down list.
The [Hole punch removal] function is disabled when a setting other
than [Automatic Page Size Detection] or [Black Background] is
specified.
5
Select [Fill with white] or [Background color] under [Hole
punch removal].
Select [Background color] when scanning a color document. If [Fill
with white] is selected, the punch holes will appear as if they are filled
with white squares.
TOP
Contents
Index
Introduction
Scanner
Overview
How to Load
Documents
Configuring the
Scan Settings
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Replacing the
Consumables
Troubleshooting
Operational
Settings
Appendix
Glossary
86