Chapter 6 Daily Care
6.2 Cleaning the Outside
The outside of the scanner, including the ADF paper chute
and the stacker, should be cleaned with either a piece of dry
cloth, a cloth moistened with Cleaner F1/mild detergent, or a
sheet of Cleaning Wipe.
Never use paint thinner or any other organic solvents
because it may result in deformation or discoloration.
Be careful not to let any moisture or water inside the
scanner during cleaning.
It may take a long time to dry if an excessive amount of
Cleaner F1/mild detergent is used. Use it in small quantity.
Wipe off the cleaner completely to leave no residue on the
cleaned parts.
fi-6130Z/fi-6140Z
Cleaner F1
or mild detergent
Cloth
Thinner
Cleaning Wipe
fi-6230Z/fi-6240Z
Cloth
Cleaner F1
or mild detergent
Thinner
Cleaning Wipe
TOP
Contents
Index
Introduction
Scanner
Overview
How to Load
Documents
Configuring the
Scan Settings
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Replacing the
Consumables
Troubleshooting
Operational
Settings
Appendix
Glossary
110