Chapter 9 Operational Settings
Scanning Thick Plastic Cards [Feed Mode]
(fi-6140Z/fi-6240Z)
When you use fi-6140Z/fi-6240Z to scan at 200 dpi (60 ppm)
in landscape, plastic cards with a thickness up to 1.4 mm can
be scanned.
1
Start up the Software Operation Panel.
Refer to
"9.1 Starting Up the Software Operation Panel" (page
2
From the listing on the left, select [Device Setting 2]
[Feed Mode].
3
Specify the feed mode.
To scan a plastic card up to 1.4 mm thick, select [Thick cards (1.25
mm or more)].
Scanning speed slows down when you select [Thick
cards (1.25 mm or more)].
153).
TOP
Contents
Index
Introduction
Scanner
Overview
How to Load
Documents
Configuring the
Scan Settings
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Replacing the
Consumables
Troubleshooting
Operational
Settings
Appendix
Glossary
179