Long Page Scanning - Fujitsu 6240 - fi - Document Scanner Operator's Manual

Chapter 5 Various Ways to Scan

Long Page Scanning

Documents with a length up to 3,048 mm (120 in.) can be
scanned by long page scanning.
1
Load the document in the ADF paper chute.
For details, refer to "Chapter 2 How to Load Documents" (page
Long page documents should be loaded one sheet at a
time in the ADF paper chute.
When you scan long pages, take note of the following.
- Loading
Hold the document with your hand so it does not fall
out of the ADF paper chute.
- Removing
Secure enough space around the stacker to prevent
the ejected sheet from falling off the stacker.
To scan documents longer than A4/Letter size, perform
the following:
Pull out the chute extensions all the way.
For details, refer to
Chute" (page
Lift the stacker and stacker extension towards you.
For details, refer to
37).
27).
2
Start up ScandAll PRO and select the [Scan] menu
[Scanner Setting].
The [TWAIN Driver (32)] dialog box appears.
If the [TWAIN Driver (32)] dialog box does not appear,
check the setting in ScandAll PRO by selecting the [Tool]
menu
then confirm that [TWAIN] is selected for [Device Driver]
in the [Scan] tab.
"1.6 Setting Up the ADF Paper
26).
"1.7 Setting Up the Stacker" (page
[Preferences] to open the [Setup] dialog box,
TOP
Contents
Index
Introduction
Scanner
Overview
How to Load
Documents
Configuring the
Scan Settings
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Replacing the
Consumables
Troubleshooting
Operational
Settings
Appendix
Glossary
76