Cleaning The Carrier Sheet - Fujitsu 6240 - fi - Document Scanner Operator's Manual

Chapter 6 Daily Care

6.4 Cleaning the Carrier Sheet

The Carrier Sheet should be cleaned with either a piece of dry
cloth, a cloth moistened with Cleaner F1, or a sheet of
Cleaning Wipe.
Gently wipe the dirt and dust off the surface and the inside of
the Carrier Sheet.
As you keep using the Carrier Sheet, dirt and dust will
accumulate on the surface and the inside.
Clean it regularly because it may result in scanning errors.
To avoid deformation and discoloration, never use paint
thinner or any other organic solvents.
Do not use force to rub against the Carrier Sheet because it
may be damaged or deformed.
After cleaning the inside, do not close the Carrier Sheet
until it is completely dry.
The Carrier Sheet should be replaced approximately every
500 scans.
For information on purchasing the Carrier Sheet, contact
your FUJITSU scanner dealer or an authorized FUJITSU
scanner service provider.
TOP
Contents
Index
Introduction
Scanner
Overview
How to Load
Documents
Configuring the
Scan Settings
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Replacing the
Consumables
Troubleshooting
Operational
Settings
Appendix
Glossary
116