Automatically Detecting Color/Monochrome Documents - Fujitsu 6240 - fi - Document Scanner Operator's Manual

Chapter 5 Various Ways to Scan
Automatically Detecting Color/Monochrome
Documents
The color of the document can be automatically detected then
output in color or grayscale for color documents, and in black
& white for black & white documents.
This function may not work properly in some applications.
1
Load the documents.
For details, refer to "Chapter 2 How to Load Documents" (page
2
Start up ScandAll PRO and select the [Scan] menu
[Scanner Setting].
The [TWAIN Driver (32)] dialog box appears.
If the [TWAIN Driver (32)] dialog box does not appear,
check the setting in ScandAll PRO by selecting the [Tool]
menu [Preferences] to open the [Setup] dialog box,
then confirm that [TWAIN] is selected for [Device Driver]
in the [Scan] tab.
3
Select the [Enable Multi Image] check box.
37).
The [Multi Image] dialog box appears.
TOP
Contents
Index
Introduction
Scanner
Overview
How to Load
Documents
Configuring the
Scan Settings
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Replacing the
Consumables
Troubleshooting
Operational
Settings
Appendix
Glossary
99