Chapter 6 Cable Connection
6.6 MiniSAS Cable Connection (For Drive Enclosures)
■
MiniSAS cable connection procedure
The following explains how to connect the miniSAS cable.
IMPORTANT
•
To help with miniSAS cable management and prevent incorrect
connections, attach labels to the miniSAS cables and make a note of
connection origins and destinations.
•
When connecting miniSAS cables, always check the symbols on the
connector and port are matching.
-
SAS (OUT) of CE or DE: Attach the connector with the
the port with the
SAS (OUT) port
-
SAS (IN) of DE: Attach the connector with the
with the
SAS (IN) port
•
When connecting miniSAS cables, check the connector orientation and
then firmly push it all the way in.
When disconnecting miniSAS cables, use the pull-tab to extract the
connector.
ETERNUS DX60/DX80/DX90 Disk storage system User Guide
Copyright 2011 FUJITSU LIMITED
symbol.
Plug connecting to SAS (OUT) port
symbol.
Plug connecting to SAS (IN) port
119
symbol to
symbol to the port
P3AM-3042-08ENZ0