Figure 8.4 [Add Drive Enclosure] - Workflow Sequence Screen 1 - Fujitsu Eternus DX60 User Manual

Chapter 8 Installing Optional Products
8.2 Drive Enclosure Installation
5
6
7
8
The screen that indicates a procedure for adding drive enclosures appears.
Figure 8.4 [Add Drive Enclosure] - Workflow Sequence screen 1
Connect the miniSAS cable (for drive enclosures).
Refer to "6.6 MiniSAS Cable Connection (For Drive Enclosures)" (page 118)
appropriate procedure.
Connect the drive enclosure's power cord.
The drive enclosure turns on.
Refer to "6.7 Power Cord Connection" (page 124)
Check that the drive enclosure's POWER LED and READY LED are on.
Click the [Next >] button.
The drive enclosure recognition process is performed. When the process completes, the
drive enclosure's AUTO POWER switch check procedure screen is displayed.
ETERNUS DX60/DX80/DX90 Disk storage system User Guide
Copyright 2011 FUJITSU LIMITED
for the appropriate procedure.
Drive enclosure
201
for the
P3AM-3042-08ENZ0