Chapter 8 Installing Optional Products
8.2 Drive Enclosure Installation
9
10
11
12
13
14
15
Check the drive enclosure's AUTO POWER switch is OFF, and click the [Next >]
button.
Figure 8.5
[Add Drive Enclosure] - Workflow Sequence screen 2
The expansion completion screen is displayed.
Click the [OK] button.
The [Add Drive Enclosure] screen is closed.
For 2.5" type drive enclosures, attach the supplied flange cover.
For details on how to attach the flange cover, refer to
Flange Cover" (page
78).
On the Storage System Status screen, check that the added drive enclosures
have been recognized.
Install the disks.
Refer to
"8.1.4 Additional Disk Installation Procedure" (page 187)
procedure.
Remove the wrist strap.
For 3.5" type drive enclosures, attach the front cover.
For details on how to attach the front cover, refer to
Cover" (page
75).
ETERNUS DX60/DX80/DX90 Disk storage system User Guide
Copyright 2011 FUJITSU LIMITED
"3.4 Attaching and Removing the
"3.3 Attaching and Removing the Front
202
for the appropriate
End of procedure
P3AM-3042-08ENZ0