E-Mail Notification Setup; Figure 7.33 [Setup Event Notification] Screen (Informational Level) - Fujitsu Eternus DX60 User Manual

Chapter 7 Setup
7.4 Monitoring Setup
8
9
10
11
7.4.2

E-mail Notification Setup

If an error occurs in the ETERNUS DX60/DX80/DX90, the event (error information, etc.) is
reported to a specified address.
The procedure to set the E-mail notification is as follows:
Procedure
1
2
Click the "Informational Level" link.
The [Informational Level] screen appears.
Select the necessary items in "Informational Level".

Figure 7.33 [Setup Event Notification] screen (Informational Level)

After the necessary settings have completed, click the [Set] button.
A confirmation screen appears.
Click the [OK] button.
The specified event notification setting is enabled.
Start GUI.
Click [Setup E-Mail Notification] under the [Network Settings] menu on the
[Global Settings] tab in the GUI screen.
The [Setup E-Mail Notification] screen appears.
ETERNUS DX60/DX80/DX90 Disk storage system User Guide
Copyright 2011 FUJITSU LIMITED
173
End of procedure
P3AM-3042-08ENZ0