Toshiba Strata CIX Programming Manual page 146

Automatic Speech Recognition (ASR)
ASR Installation
Step 10: Select Greetings
1. From the Mailbox Editor menu, access Mailbox 900.
2. Using the spin button on the Auto Attendant tab screen, select the greetings that will play for
the Selected greeting and Selected instructional greeting fields. (See
Processing
3. (Optional) On the Auto tab screen, you can schedule the greetings to play on specified days and
times.
Step 11: (Optional) Speech Enable Single-digit Menus
Note
1. From the eManager Main menu, click Advanced Configuration > System > Voice Menu. The
Voice Menu screen displays.
2. Add the voice command(s) and recordings (see
instructions).
3. From the eManager Main menu, click Advanced Configuration > Voice Mail > Mailbox. The
Mailbox Editor screen displays.
4. Access the individual user's mailbox and click the Menus tab.
5. At the bottom of the screen, check Voice Menu Enabled field.
6. Starting with Menu 1, select the application required from the drop-down menu (i.e., transfer).
In the next field enter the mailbox number to which the call should be transferred, etc. In the
last field, select a voice command from the drop-down menu (entered in Step 2 above).
7. When you are finished adding voice commands to the Menu screen, click the Auto Attendant
screen and under Call Processing, check ASR Enabled.
8. Click Submit to save your changes.
Note
Step 12: (Optional) Add Aliases for Login and Sending
The ASR AA Feature Group enables the user to call voice mail and:
•
speak a command to log in to his/her mailbox
Note
•
say "send message" or "quick message" to send a message to a user
‰ To modify the User Login and/or Quick Message features
!
Modify the system parameter settings shown in the table below. See
page 3-30
6-6
for instructions on the Mailbox Editor screens.)
Starting with Stratagy ES Release 5.0, users have the option of speech enabling single-
digit menu commands.
The sys_asr_enabled parameter must be enabled in Step 12 below for this feature to work.
Messages
The system is pre-programmed for several commands to log into a mailbox.
They are: mailbox login, mailbox logon, user login, user logon, access mailbox, and log
me in. Additional phrases can be added, if desired.
for instructions on modifying the settings for these ASR parameters.
Chapter 4 – Voice
"Add Voice Command"
"Modify Parameters"
Strata CIX Voice Mail Programming
on page 3-27 for
on
01/07