Toshiba Strata CIX Programming Manual page 186

Advanced Integrations and Applications
AMIS Networking
Table 10-2 AMIS Parameters (continued)
Parameter
sys_amis_max_node
sys_amis_rna
sys_amis_telephone_number
sys_amis_unknown_node_action
sys_local_amis_node
Step 2: Create/Modify AMIS Gateway and/or Proxy User Agents
1. From the eManager screen, click Advanced Configuration > Voice Mail > AMIS Gateway or
AMIS Proxy. The appropriate screen displays.
2. Click Create. The Create User Agent screen displays.
3. From the Create screen, enter a single User Agent number (e.g., 881), a range of numbers (e.g.,
800-804) or a combination of both separated by commas (e.g., 800-802, 881, 888).
Note
4. Click OK. The Creating dialog box displays while the program creates the User Agents. When
the process is complete, the screen indicates whether the creation of the User Agent(s) was
successful.
5. Click Exit. The AMIS Gateway or AMIS Proxy screen displays (see
10-6).
6. Highlight the User Agent number in the list to the right of the screen. The user agent is
displayed on the active screen.
7. (Optional) Click Comment field and type in a comment.
Note
8. Check "Enabled" box on the screen.
9. In the Destination System Number field, type the Destination System Number.
10-10
Maximum number of remote nodes (Gateway and Proxy User Agents) that
can be in the network. If the actual number exceeds this value, some nodes
are inaccessible.
Possible values: 1~256 (default = 255)
Enables the ring no answer time-out to be increased to allow for slow
answers from AMIS systems.
Possible values: 1~10 (default = 4)
Local telephone number of the resident voice mail system. Single quotes are
required.
Default: blank comment line
Whether voice mail accepts messages from unknown AMIS nodes.
Possible values:
1:
2:
Gateway User Agent number that represents the local AMIS node.
Messages addressed to this node are delivered directly to the real local box
number instead of being shipped out on the network.
Possible values: valid User Agent number.
Default: blank comment line
The number you enter must be unique. If the number already exists, Voice Mail
Administration indicates that the User Agent could not be created.
Comment should consist of GATEWAY or PROXY USER AGENT and any other
identifying information.
Description
Refuses to accept messages.
(default) Delivers this message even though replies are impossible.
Figure 10-25
Strata CIX Voice Mail Programming
on page
01/07