Add Integration Group; Delete Integration Group - Toshiba Strata CIX Programming Manual

Voice Mail Configuration
Telephone Systems

Add Integration Group

1. From the eManager Main menu on the left, click Advanced Configuration > Systems > VM
Phone Systems. The Voice Mail Telephone Systems screen displays (see
2. Click Add Group. The Add New Telephone Systems screen displays.
3. Type a new Integration Group name and click OK.
4. Select the Switch Type from the drop-down menu.
Note
5. Select an Integration Type from the drop-down menu. For Strata CIX, select CTX Integration.
Note
6. Select the Serial Port from the drop-down menu.
7. Double-click the Max. Ext. Length field and using the spin-button, select a number from 1~10.
Note
8. (Analog Integrations Only) Modify Dial Codes and Integration Patterns, as required. To change
the sequence of integration patterns, highlight the line and use the Move arrows to the right of
the screen.
For Strata CIX only, scroll down to the bottom of the Integration Dial Codes list to locate three
parameters: Call Agent IP Address, Simple Network Management Protocol (SNMP)
Community, LIPU IP Address (MAS).
•
Change the "Call Agent IP Address" to the IP address that has been assigned to the Strata
CIX (LCTU).
•
Enter the SNMP Community name that has been assigned in the target Strata CIX.
•
Verify/change the "IPU IP Address" that has been assigned to the Strata CIX (LIPU).
Note
9. Click Submit. Your changes are saved and the screen remains open. A dialog box displays.
10.Click OK. The changes are added to the voice mail database the next time voice mail is shut
down and restarted.

Delete Integration Group

1. From the eManager Main menu on the left, click Advanced Configuration > Systems > VM
Phone Systems. The Voice Mail Telephone Systems screen displays (see
2. From the drop-down menu, select the Integration Group Name you want to delete.
3. Click Delete Group. A dialog box asks you to confirm the deletion.
Important!
4. Click OK. The Telephone Systems screen displays without the deleted group in the windows.
The changes are added to the voice mail database the next time voice mail service is shutdown
and restarted.
3-10
If you select <Create/Save/Delete Switch Type>, the Create/Save/Delete Switch Type
screen displays and you need to type the name for the new switch type and click OK. The
new switch type is saved with the settings that appear on the screen at the time it is saved.
The name is added to the drop-down menu for the Switch Type field.
For Strata CIX skip to Step 8.
The standard is 10.
If an LIPX is installed, enter the IP of the LIPU.
When you delete a group, references to it in the Answer Methods screen are
removed. References in User Agent or COS must be removed manually by you. After
deletion, validate Answer Method, User Agent, and COS definitions, otherwise, Auto
Attendant (AA) and notification does not work properly.
Figure 3-2).
Figure 3-2).
Strata CIX Voice Mail Programming 01/07