Profiles > Ssid - Dell PowerConnect W-Airwave Configuration Manual

Table 47 Aruba Configuration > Profiles > RF > Optimization Profile Settings (Continued)
Field
Interference
Threshold
(0-100%)
Interference
Threshold Exceed
Time
(0-360000 sec)
Interference
Baseline Time
(0-360000 sec)
RSSI Falloff Wait
Time (0-8 sec)
Low RSSI
Threshold (0-255)
RSSI Check
Frequency (0-255)
3. Click
Profiles > SSID
Configures network authentication and encryption types. This profile also includes references an EDCA
Parameters Station Profile, an EDCA Parameters AP Profile and a High-throughput 9HT) SSID profile.
SSID—The SSID profile defines SSID settings and references additional EDCA and HT profiles. Refer to
"Profiles > SSID > EDCA AP" on
EDCA AP—AP to client traffic prioritization, including EDCA parameters for background, best-effort,
voice and video queues. Refer to
EDCA Station—Client to AP traffic prioritization parameters, including Enhanced Distributed Channel
Access (EDCA) parameters for background, best-effort, voice and video queues. Refer to
SSID > EDCA Station" on
HT SSID—High-throughput APs support additional settings not available in legacy APs. A High-
throughput SSID profile can enable or disable high-throughput (802.11n) features and 40 Mhz channel
usage, and define values for aggregated MAC protocol data units (MDPUs) and Modulation and Coding
Scheme (MCS) ranges. If none of the APs in your mesh deployment are 802.11n-capable APs, you do not
need to configure a high-throughput SSID profile. If you modify a currently provisioned and running
high-throughput SSID profile, your changes take affect immediately. You do not reboot the controller or
the AP. Refer to
802.11K—The 802.11k protocol provides mechanisms to APs and clients to dynamically measure the
available radio resources. In a 802.11k enabled network, APs and clients can send neighbor reports,
beacon reports, and link measurement reports to each other. This allows the APs and clients to take
appropriate connection actions. Refer to
126 | Aruba Configuration Reference
Default
100
60
600
0
0
0
Add Save
or . The added or edited profile appears on the
page 134.
"Profiles > SSID > HT SSID" on
Description
Sets the maximum allowable interference to be tolerated by APs that are
configured with this optimization profile, as a percentage.
Sets the amount of time in seconds during which interference is allowed to
exceed the threshold percentage. When interference exceeds the threshold
percentage longer than the amount of time specified in this field, the
threshold has been exceeded.
Sets the period of time in seconds during which interference levels are to be
monitored. This setting governs the deployment of the interference
percentage threshold and the threshold exceed time.
Sets the maximum time to wait with decreasing received signal strength
indication (RSSI) before de-authorization is sent to the client.
Sets the low threshold for received signal strength indication (RSSI). If the
RSSI for a specific client falls below this threshold and continues to fall for
the RSSI Falloff Wait Time, then the AP sends a de-authorization command
to the client. Such de-authorization removes the client from the current AP
and forces it to re-authentication on a nearby AP.
Sets the amount of time in seconds between RSSI coverage checks.
page 127.
"Profiles > SSID > EDCA AP" on
page 137.
"Profiles > SSID > 802.11K" on
AirWave Wireless Management Suite | Configuration Guide
Profiles > RF > Optimization
page 131.
page 138.
page.
"Profiles >