Advanced Services > Vpn Services - Dell PowerConnect W-Airwave Configuration Manual

Add
Click
Domain. The domain is now available for use in IP Mobility profiles.
Advanced Services > VPN Services
For wireless networks, virtual private network (VPN) connections can be used to further secure the
wireless data from attackers. The Aruba controller can be used as a VPN concentrator that terminates all
VPN connections from both wired and wireless clients.
You can configure the controller for the following types of VPNs:
Remote access VPNs allow hosts, such as telecommuters or traveling employees, to connect to private
networks such as a corporate network over the Internet. Each host must run VPN client software that
encapsulates and encrypts traffic and sends it to a VPN gateway at the destination network. The
controller supports the following remote access VPN protocols:
Layer-2 Tunneling Protocol over IPSec (L2TP/IPSec)
Point-to-Point Tunneling Protocol (PPTP)
Site-to-site VPNs allow networks such as a branch office network to connect to other networks such as a
corporate network. Unlike a remote access VPN, hosts in a site-to-site VPN do not run VPN client
software. All traffic for the other network is sent and received through a VPN gateway that encapsulates
and encrypts the traffic.
Before enabling VPN authentication, you must configure the following:
The default user role for authenticated VPN clients—this is configured with roles and policies.
The authentication server group the controller will use to validate the clients—this is configured with
server groups.
You then specify the default user role and authentication server group in the VPN authentication profile.
Advanced Services > VPN Services
The
and allows you to add VPN service profiles or to edit existing profiles.
Click the
change its configuration. The
Table 76 Advanced Services
Field
General Settings
Folder
Name
Other Settings
IKE Profile
AirWave Wireless Management Suite | Configuration Guide
to create the new IP Mobility Domain, or click
Add
button to add a new VPN Service profile, or click the pencil icon next to an existing profile to
VPN Services
> VPN Services > Add/Edit VPN Service Profiles
Default
Top
Blank
N/A
Save
to save changes to a reconfigured IP Mobility
page displays all VPN service profiles that are currently configured,
detail page appears, with settings defined in
Description
Use this field to set and display the folder with which the VPN service
profile is associated. The drop-down menu displays all folders
available for association with the VPN services profile.
Enter the name of the VPN services profile.
Select an IKE profile from the drop-down menu.
Click the add icon to add a new profile of this type, or click the pencil
icon to edit an existing IKE profile.
For additional information, refer to
Services > IKE" on page 166.
Table 76.
Field Descriptions
"Advanced Services > VPN
Aruba Configuration Reference | 165