Profiles > Ap > Snmp > Snmp User - Dell PowerConnect W-Airwave Configuration Manual

Table 24 Aruba Configuration > Profiles > AP > SNMP Profile Settings
Field
Other Settings
SNMP Enable
Enter Community
String
Select SNMP User Profile
Select SNMP User
Profile
3. Click
Profiles > AP > SNMP > SNMP User
Perform these steps to configure a
1. Click
2. Click the
that user. The
Table 25 Aruba Configuration > Profiles > AP > SNMP > SNMP User Settings
Field
General Settings
Folder
Name
Other Settings
User Name
Authentication
Profile
3. Click
be referenced in SNMP profiles.
Refer to the following topics for additional information about SNMP profiles:
"Aruba Controller Traps" on page 92
"Access Point/Air Monitor Traps" on page 93
AirWave Wireless Management Suite | Configuration Guide
Default
Yes
Add Save
or . The added or edited
Profiles > AP > SNMP > SNMP User
Add
button to create a new
Details
page appears. Complete the settings as described in
Default
Top
Blank
Blank
none
Add Save
or . The added or edited
Description
Enable or disable SNMP in this profile.
Text field allows you to type one or multiple SNMP community strings
applied to this profile.
If SNMP is enabled in this profile, and one or more profiles have been
configured, select the corresponding SNMP profile from this list.
SNMP
profile appears on the
SNMP
profile.
Aruba Navigation
in the
SNMP
user, or click the
Description
Use this field to set and display the folder with which the profile is
associated. The drop-down menu displays all folders available for
association with the profile.
Folders provide a way to organize the visibility of device parameters that
is separate from the configuration groups of devices. Using folders, you
can view basic statistics about device, and define which users have
visibility to which device parameters.
Name of the SNMP user profile. This is the name by which the SNMP
user is managed and accessed when cited by SNMP profiles
Actual name of the network user to be supported by this SNMP profile in
Aruba Configuration
Select a protocol from the drop-down menu. Options are as follows:
none—Uses no authentication type for the user being defined.
md5—Sets the MD5 hashing algorithm for the user that hashes a
cleartext password.
sha—Sets the SHA hashing algorithm for the user that hashes a
cleartext password.
SNMP
user appears on the
SNMP
profiles page.
pane.
pencil
icon next to an existing user to edit
Table 24:
SNMP
User page. This user can now
Aruba Configuration Reference | 91