Security > User Roles > Vpn Dialers - Dell PowerConnect W-Airwave Configuration Manual

Table 57 Security > User Roles > Add New BW Contract Page Field Descriptions (Continued)
Field
Name
Other Settings
Units
Bandwidth
Add
Click
an existing profile. The new BW contract appears on the
Security > User Roles > VPN Dialers
The VPN dialer can be downloaded using Captive Portal. For the user role assigned through Captive Portal,
configure the dialer by the name used to identify the dialer. For example, if the captive portal client is
assigned the guest role after logging on through captive portal and the dialer is called
mydialer
Select a dialer from the drop-down list and assign it to the user role. This dialer will be available for
download when a client logs in using captive portal and is assigned this role.
Security > User Roles > Add New VPN Dialer
The
Table 58 Security > User Roles > Add VPN Dialer Field Descriptions
Field
General Settings
Folder
Name
Other Settings
Enable PPTP
144 | Aruba Configuration Reference
Default Description
Blank Enter the name of the profile.
kbits Configure bandwidth contracts, in kilobits per second (Kbps) or megabits
per second (Mbps), for the following types of traffic:
N/A Specify whether this bandwidth contract is upstream or downstream by
typing one of the following terms in lower case:
Click Add to finish the new BW Contract and to return to the BW Contract
page. The new contact appears below the Add New BW Contract button.
to complete the configuration of the
as the dialer to be used in the guest role.
Default
Top
Blank
No
from the client to the controller ("upstream" traffic)
from the controller to the client ("downstream" traffic)
upstream
downstream
BW Contract
profile, or click
Security > User Roles
page contains the following fields, as described in
Description
Use this field to set and display the folder with which the VPN Dialer is
associated. The drop-down menu displays all folders available for
association with the profile.
Enter the name of the profile.
Enable PPTP with this setting as desired.
Point-to-Point Tunneling Protocol (PPTP) is an alternative to L2TP/IPSec.
Like L2TP/IPSec, PPTP provides a logical transport mechanism to send PPP
frames as well as tunneling or encapsulation so that the PPP frames can be
sent across an IP network. PPTP relies on the PPP connection process to
perform user authentication and protocol configuration.
With PPTP, data encryption begins after PPP authentication and connection
process is completed. PPTP connections use Microsoft Point-to-Point
Encryption (MPPE), which uses the Rivest-Shamir-Aldeman (RSA) RC-4
encryption algorithm. PPTP connections require user-level authentication
through a PPP-based authentication protocol (MSCHAPv2) is the currently-
supported method).
AirWave Wireless Management Suite | Configuration Guide
Save
to complete the editing of
page.
mydialer
, configure
Table 58: