Profiles > Ids > General - Dell PowerConnect W-Airwave Configuration Manual

4. Select the profile type to view or configure:
General—Configures general AP attributes. Refer to
Signature Matching—Configures signatures and signature matching for intrusion detection. Refer to
"Profiles > IDS > Signature Matching" on
Signature—Defines a predefined signature. Refer to
Signatures" on
Denial of Service—Configures traffic anomaly settings for Denial of Service (DoS) attacks. Refer to
"Profiles > IDS > Impersonation" on
Rate Thresholds—Defines thresholds assigned to the different frame types for rate anomaly
checking. Refer to
Impersonation—Configures anomaly settings for impersonation attacks. Refer to
Impersonation" on
Unauthorized Device—Configures detection for unauthorized devices. Also configures rogue AP
detection and containment. Refer to
5. Click
Profiles > IDS > General
Perform these steps to configure a
1. Click
this page.
2. Click the
edit that profile. The
Table 29 Aruba Configuration > Profiles > IDS > General Profile Settings
Field
General Settings
Folder
Name
Other Settings and AP SNMP User Profiles
Stats Update Interval
(60-36000 sec)
AP Inactivity Timeout
(5-36000 sec)
STA Inactivity
Timeout
(30-36000 sec)
Min Potential AP
Beacon Rate
(0-100%)
96 | Aruba Configuration Reference
page 98.
"Profiles > IDS > Denial of Service > Rate Threshold" on
page 103.
Add Save
or . The added or edited
Profiles > IDS > General
in the
Add
button to create a new
Details
page appears. Complete the settings as described in
Default
Top
Blank
60
5
60
25
"Profiles > IDS > General" on
page 97.
page 103.
"Profiles > IDS > Unauthorized Device" on
IDS
profile appears on the
General IDS
profile.
Aruba Navigation
pane. The list of current IDS profiles appears on
General
profile, or click the
Description
Use this field to set and display the folder with which the profile is
associated. The drop-down menu displays all folders available for
association with the profile.
Folders provide a way to organize the visibility of device parameters that is
separate from the configuration groups of devices. Using folders, you can
view basic statistics about device, and define which users have visibility to
which device parameters.
Enter the name of the profile.
Set the time interval, in seconds, for the AP to update the controller with
statistics.
NOTE: This setting takes effect only if the Aruba Mobility Manager
is configured. Otherwise, statistics update to the controller is
disabled.
Set the time, in seconds, after which an AP is aged out.
Set the time, in seconds, after which a STA is aged out.
Set the minimum beacon rate acceptable from a potential AP, in percentage
of the advertised beacon interval.
AirWave Wireless Management Suite | Configuration Guide
"Profiles > IDS > Signature Matching >
page 101.
page 104.
IDS
profiles page.
pencil
icon next to an existing profile to
Table
page 96.
"Profiles > IDS >
29: