Security > Server Groups > Radius - Dell PowerConnect W-Airwave Configuration Manual

Table 63 Security > Server Groups > Add LDAP Server Field Descriptions (Continued)
Field
Base-DN
Filter
Key Attribute
Timeout (1030 sec)
Enable
Preferred Connection
Type
Add
Click
existing server. The new LDAP server appears on the
server is now available to be used by server groups.
Security > Server Groups > RADIUS
You can configure RADIUS servers for use by a server group. The
displays current RADIUS servers available for inclusion in server groups. Click
RADIUS server, or click the pencil icon next to an existing RADIUS server to edit the configuration.
Security > Server Groups > Add New RADIUS Server
The
Table 64:
Table 64 Security > Server Groups > RADIUS
Field
General Settings
Folder
Name
Other Settings
Host IP Address
Key (Confirm Key)
Auth Port
152 | Aruba Configuration Reference
Default
N/A
(objectclass=*)
sAMAccountName
20
Yes
ldap-s
to complete the configuration of the
Default
Top
Blank
N/A
N/A
1812
Description
Enter the distinguished name of the node which contains the
entire user database to use.
Select the filter that should be applied to any search of the user in
the LDAP database.
Enter the attribute that should be used as a key in search for the
LDAP server. For Active Directory, the value is sAMAccountName.
Define the timeout period of a LDAP request, in seconds.
Use this field to enable or disable the LDAP server being
configured. You can configure the LDAP server as disabled, but
return later to enable it.
Select the connection type for the LDAP server from the drop-
down menu. LDAP servers support the following connection
types:
clear-text—No encryption is used.
ldap-s—Uses SSL encryption.
start-tls—Uses TLS encryption.
LDAP Server
, or click
Security > Server Groups > LDAP Server
Security > Server Groups > RADIUS
page contains the following fields, as described in
Description
Use this field to set and display the folder with which the server is
associated. The drop-down menu displays all folders available for
association with the server group.
Enter the name of the server.
Set the IP address of the authentication server.
Set the shared secret between the controller and the authentication
server. The maximum length is 48 bytes.
Set the authentication port on the server.
AirWave Wireless Management Suite | Configuration Guide
Save
to complete the editing of an
Add
to create a new
page. This
page