Access Point/Air Monitor Traps - Dell PowerConnect W-Airwave Configuration Manual

Access Point/Air Monitor Traps

Table 27
Table 27 Key SNMP Traps from Aruba Access Points or Air Monitors
Trap
Unsecure AP Detected
Station impersonation
Reserved channel impersonation
Valid SSID violation
Channel misconfiguration
OUI misconfiguration
SSID misconfiguration
Short Preamble misconfiguration
AM misconfiguration
Repeat WEP-IV violation
Weak WEP-IV violation
Adhoc networks detected
Valid station policy violation
AP interference
AirWave Wireless Management Suite | Configuration Guide
describes the key traps that can be generated by an Aruba access point or an air monitor:
Description
This trap indicates that an air monitor has detected and classified an access point
as unsecure. It will indicate the location of the air monitor that has detected the
unsecure AP, the channel on which the AP was detected as well as the BSSID and
SSID of the detected AP.
This trap indicates an air monitor has detected a station impersonation event. The
trap will provide the location of the air monitor that has detected the event and the
MAC address of the station.
This trap indicates an access point is being detected is violating the reserved
channels. The location of the AP/AM that detects the event is provided in the trap.
In addition to this, the BSSID and SSID of the detected AP is also included.
This indicates a configuration in the configuration of the SSID of the AP. The AP
generates the trap and includes its BSSID, the configured SSID and the location of
the AP in the trap.
This trap indicates an error in channel configuration of an AP. The AP generates the
trap and includes its BSSID, the configured SSID and the location of the AP in the
trap
This trap indicates an error in the OUI configuration of an Access Point. The AP
generates the trap and includes its BSSID, the configured SSID and the location of
the AP in the trap
This trap indicates an error in the SSID configuration of an Access Point. The AP
generates the trap and includes its BSSID, the configured SSID and the location of
the AP in the trap
This trap indicates an error in the Short Preamble configuration of an AP. The AP
generates the trap and includes its BSSID, the configured SSID and the location of
the AP in the trap. This check will be done only if the short-preamble option is
selected for the AP from the CLI or the WebUI. For a complete list of traps, refer to
the Aruba MIB Reference.
This trap indicates an error in the Short Preamble configuration of an AP. The AP
generates the trap and includes its BSSID, the configured SSID and the location of
the AP in the trap
This trap indicates that the AM has detected a valid station or a valid AP sending
consecutive frames that has the same IV (initialization vector). This usually means
that entity has a "flawed" WEP implementation and is therefore a potential security
risk.
This trap indicates that the AM has detected a valid station or a valid AP sending
frames with an IV that is in the range of IV that are known to be cryptographically
weak and therefore are a potential security risk.
This trap indicates that the AM has detected Adhoc networks
This trap indicates that a valid station policy is being violated.
This trap indicates that the indicated AM (identified by the BSSID/ SSID) is
detecting AP interference on the indicated channel.
Priority
Critical
Critical
High
High
High
High
High
High
High
High
High
High
High
Medium
Aruba Configuration Reference | 93