Security > User Roles > Bw Contracts - Dell PowerConnect W-Airwave Configuration Manual

Table 56 Security > User Roles > Add New User Role Field Descriptions
Field
VPN Dialer Profile
Policies
Add New Policy
Policy
Aruba AP Group
Add
Click
existing role. The new role appears on the
Security > User Roles > BW Contracts
You can manage bandwidth utilization by assigning maximum bandwidth rates, or bandwidth contracts, to
user roles. You can configure bandwidth contracts, in kilobits per second (Kbps) or megabits per second
(Mbps), for the following types of traffic:
from the client to the controller ("upstream" traffic)
from the controller to the client ("downstream" traffic)
You can assign different bandwidth contracts to upstream and downstream traffic for the same user role.
You can also assign a bandwidth contract for only upstream or only downstream traffic for a user role; if
there is no bandwidth contract specified for a traffic direction, unlimited bandwidth is allowed.
By default, all users that belong to the same role share a configured bandwidth rate for upstream or
downstream traffic. You can optionally apply a bandwidth contract on a per-user basis; each user who
belongs to the role is allowed the configured bandwidth rate. For example, if clients are connected to the
controller through a DSL line, you may want to restrict the upstream bandwidth rate allowed for each user
to 128 Kbps. Or, you can limit the total downstream bandwidth used by all users in the 'guest' role in Mbps.
Details
The
as described in
Table 57 Security > User Roles > Add New BW Contract Page Field Descriptions
Field
General Settings
Folder
AirWave Wireless Management Suite | Configuration Guide
Default
None
N/A
dhcp-acl
None
to complete the configuration of the
Security > User Roles > Add New Bandwidth Contract
page for
Table 57:
Default Description
Top Use this field to set and display the folder with which the Bandwidth
Contract is associated. The drop-down menu displays all folders available
for association with the profile.
Description
(Optional) Use this field to assign a VPN dialer to a user role. Select a dialer
from the drop-down list and assign it to the user role. This dialer will be
available for download when a client logs in using captive portal and is
assigned this role.
For additional VPN information, refer to
Dialers" on page 144.
Click this button to add a new policy to the user role. The following two
fields appear with respective drop-down menus:
Policy
Aruba AP Group
Select the policy to apply to this user role. Once any policy is selected, you
can edit the policy by clicking the pencil icon. You can create a new policy
by clicking the add icon. For additional information, refer to
Policies" on page 146.
Select the Aruba AP group in which this policy and user role will apply.
For additional information, refer to
and Guidelines" on page 34.
User Role
, or click
Security > User Roles
"Security > User Roles > VPN
"General Aruba AP Groups Procedures
Save
to complete the editing of an
page.
page contains the following fields,
Aruba Configuration Reference |
"Security >
143