Security > Server Groups > Tacacs - Dell PowerConnect W-Airwave Configuration Manual

Table 64 Security > Server Groups > RADIUS (Continued)
Field
Acct Port
Retransmits (0-3)
Timeout
NAS ID
NAS IP
Use MD5
Enable
Add
Click
existing server. The new server appears on the
available to be used by server groups.
Security > Server Groups > TACACS
You can configure TACACS servers for use by a server group. The
displays current TACACS servers available for inclusion in server groups. Click
RADIUS server, or click the pencil icon next to an existing TACACS server to edit the configuration.
Security > Server Groups > Add New TACACS Server
The
Table 65:
Table 65 Security > Server Groups > TACACS
Field
General Settings
Folder
Name
Other Settings
Host IP Address
Key (Confirm Key)
TCP Port
Retransmits (0-3)
AirWave Wireless Management Suite | Configuration Guide
Default
1813
3
(1-30 sec)
N/A
N/A
No
Yes
to complete the configuration of the
Default
Top
Blank
0.0.0.0
N/A
49
3
Description
Set the accounting port on the server.
Set the Maximum number of retries sent to the server by the
controller before the server is marked as down.
Set the maximum time, in seconds, that the controller waits before
timing out the request and resending it.
Set the Network Access Server (NAS) identifier to use in RADIUS
packets.
Set the NAS IP address to send in RADIUS packets.
You can configure a "global" NAS IP address that the controller
uses for communications with all RADIUS servers. If you do not
configure a server-specific NAS IP, the global NAS IP is used.
Enable or disable the use of MD5 hashing for cleartext passwords.
Enable or disable the RADIUS server.
RADIUS
server, or click
Security > Server Groups > RADIUS
Security > Server Groups > TACACS
page contains the following fields, as described in
Description
Use this field to set and display the folder with which the server is
associated. The drop-down menu displays all folders available for
association with the server group.
Enter the name of the server.
Set the shared secret to authenticate communication between
the TACACS+ client and server.
Set the TCP port to be used by the server.
Set the maximum number of times a request is retried.
Save
to complete the editing of an
page. This server is now
Add
to create a new
Aruba Configuration Reference |
page
153