Profiles > Ap > Ap Wired - Dell PowerConnect W-Airwave Configuration Manual

Table 21 Aruba Configuration > Profiles > AP > Regulatory Domain Profile Settings
Field
Valid 802.11g 40
MHz Channel Pairs
Valid 802.11a
40MHz Channels
Valid 802.11g 40
MHz Channels
3. Click
Profiles
Profiles > AP > AP Wired
The wired AP profile controls the configuration of the Ethernet port(s) on your AP. You can use the wired
AP profile to configure Ethernet ports for bridging or secure jack operation using the wired AP profile.
Perform these steps to configure a
1. Click
this type.
2. Click the
edit that profile. The
Table 22 Aruba Configuration > Profiles > AP > Wired Profile Settings
Field
General Settings
Folder
Name
Other Settings
Wired AP Enable
Forward Mode
88 | Aruba Configuration Reference
Default
N/A
N/A
N/A
Add Save
or . The added or edited
page.
Profiles > AP > Wired
in the
Add
button to create a new
Details
page appears. Complete the settings as described in
Default
Top
Blank
No
tunnel
Description
Select a 40MHz channel pair for 802.11ag
A high-throughput (HT) AP can use a 40 MHz channel pair comprised of
two adjacent 20 MHz channels available in the regulatory domain profile
for your country. When ARM is configured for a dual-band AP, it will
dynamically select the primary and secondary channels for these
devices. It can, however, continue to scan all changes in the a+b/g
bands to calculate interference and detect rogue APs.
Specify the valid channels for 40MHz channel pairing in 802.11a.
Specify the valid channels for 40MHz channel pairing in 802.11g.
Regulatory Domain
Wired
AP profile.
Aruba Navigation
pane. This page summarizes the current profiles of
Wired
profile, or click the
Description
Use this field to set and display the folder with which the profile is
associated. The drop-down menu displays all folders available for
association with the profile.
Folders provide a way to organize the visibility of device parameters
that is separate from the configuration groups of devices. Using
folders, you can view basic statistics about device, and define which
users have visibility to which device parameters.
Enter the name of the profile.
Designate whether Wired APs are to be enabled or disabled.
If Wired AP is enabled, designate whether forwarding is to be bridge-
based or tunnel-based.
AirWave Wireless Management Suite | Configuration Guide
Regulatory Domain
profile appears on the
pencil
icon next to an existing profile to
Table 22: