10. Very carefully apply the thermal interface material (heat radiation sheet) on
top of the processor so that it is completely covered. See Figure 4-16.
Notes:
must be handled very carefully. If the cooling sheet is
damaged, it must be replaced with a new one. Reuse of the
cooling sheet is not permitted.
Do not stick multiple cooling sheets on a processor, only one
is needed. Keep any remaining cooling sheets as spares.
Figure 4-16. Installing the Thermal Cooling Sheet
11. Position the heat sink on the processor so that the L-channel on its bottom
face fits the lever and plastic end of the socket. See Figure 4-17.
Figure 4-17. Installing the Processor Heat Sink
4-18 CRU Replacement and Server Upgrades
The thermal interface material is very fragile, it
Plastic
L-Channel
Lever
L-Channel