NEC Express5800 320La User Manual page 181

Table 5-3. POST Error Codes and Messages (continued)
Error Code and Message
0B93 BMC SDR Repository empty
0B94 IPMB signal lines do not
respond
0B95
BMC FRU device failure
0B96 BMC SDR Repository failure
0B97 BMC SEL device failure
0B98 BMC SEL Overflow
0BB0 SMBIOS - SROM data read
error
0BB1 SMBIOS - SROM data
checksum bad
0BD0 1st SMBus device address not
acknowledged
0BD1
1st SMBus device Errror
detected
0BD2
1st SMBus timeout
0BD3
2nd SMBus device address not
acknowledged
0BD4
2nd SMBus device Errror
detected
0BD5
2nd SMBus timeout
0BD6
3rd SMBus device address not
acknowledged
0BD7
3rd SMBus device Errror
detected
0BD8
3rd SMBus timeout
0BE2
7th SMBus device address not
acknowledged
0BE3 7th SMBus device Errror
detected
0BE4
7th SMBus timeout
0BE5
8th SMBus device address not
acknowledged
0BE6 8th SMBus device Errror
detected
0BE7 8th SMBus timeout
Description
BMC is faulty.
SEL (System Event Log)
overflowed.
SROM is faulty.
Front panel board is faulty.
Board is faulty.
Action
Replace the PCI module
board.
Clear the SEL.
Replace the front panel board.
Check cable connection.
Replace the board.
Problem Solving 5-27