Thermal Sensor Submenu
Feature
Thermal Sensor
Upper Limit
Lower Limit
Wake On Events Submenu
Feature
Wake On LAN
Console Redirection Submenu
Feature
Serial Port Address
Baud Rate
Flow Control
Console
Connection
3-14 Configuring Your System
Choices or
Display Only
Description
Disabled
When enabled determines if
Enabled
the BIOS will disable boot (if
temperature is not within a
safe range).
50 (11 to 80)
Sets the upper temperature
limit in Centigrade.
5 (0 to 69)
Sets the lower temperature
limit in Centigrade.
Choices or
Display Only
Description
Disabled
Enables Wake ON LAN
Enabled
support.
Choices or
Display Only
Description
Disabled
If enabled, the console will be
Serial Port 2
redirected to this port.
(3F8h/IRQ4)
If console redirection is
Serial Port 2
enabled, this address must
(2F8h/IRQ3)
match the settings of serial
port 2.
57.6K
Enables the specified baud
19.2K
rate.
No Flow Control
Enables flow control.
XON/OFF
Direct
Indicate whether the console is
Via Modem
connected directly to the
system or a modem is used to
connect.
Your Setting
Your Setting
Your Setting