NEC Express5800 320La User Manual page 148

9. Adjust the position of each device bay bracket so that its end is flush with
the front face of the tape drive and secure.
Figure 4-76. Adjusting the Device Bay Bracket
10. Mount the 5.25-inch tape in the device bay by inserting its hooks into their
mating slots in the bay and sliding it forward until it is flush with the front
panel. See Figure 4-77.
Figure 4-77. Mounting the 5.25-inch Tape Drive
11. Secure the 5.25-inch device to the device bay with the two screws removed
in Step 3 above. See Figure 4-78.
Note:
mounted tape drive is flush with the front panel of the device
bay. If a minor adjustment is necessary remove the tape
drive and adjust the position of each of its device bay
brackets.
4-62 CRU Replacement and Server Upgrades
C B
A
Front face
B Tape Drive
C Bracket
B
A Oblong slot (one for each side)
B Hook (one on each side)
Check to ensure that the front plate of the
A
A