NEC Express5800 320La User Manual page 23

Table 1-1. System Status LED Indicators
LED Status
System Power Off
Green
Status 1 and Off
Status 2
Green
(Steady
light)
Green
(Flashing
light)
Amber
Amber
(Flashing
light)
Red
Disk Activity Off
Amber
Green
Description
Power OFF
Power ON
AC Power OFF
Power-On Self-Test
(POST) is running
Status 1 OFF
Status 2 OFF
CPU bus error
ISA-bus I/O check error
PCI and CPU modules are
operating normally
CPU or PCI module is
operating in simplex mode
Critical temperature alarm
Critical voltage alarm
Noncritical temperature
alarm
Noncritical voltage alarm
Fan alarm
Detected device failure
Detected error with
redundant power supply
BMC failure
Not accessing disk drives
Internal disk drive failure
Accessing disk drives
Response
None required (normal)
None required (normal)
None required (normal)
None required (normal)
Check Status 2
Check Status 1
Turn system off and on. If error
appears during POST, record the
error condition and contact your
technical support representative.
Turn system off and on. If error
appears during POST, record the
error condition and contact your
technical support representative.
None required (normal)
None required (normal)
If error exists, record the error
condition and contact your technical
support representative.
Check condition
Check condition
Check condition
Check condition
Contact your technical support
representative.
Check power supply status LED
indicators, see Table 1-6.
One of the PCI modules is not
installed.
None required (normal)
Check disk drive status LEDs
None required (normal)
System Overview 1-9