NEC Express5800 320La User Manual page 147

4. Remove the two screws securing the dummy cover to the device bay bracket
assembly. See Figure 4-74.
5. Remove the dummy cover. See Figure 4-74.
Note:
Save the dummy cover for future use.
A
B
Figure 4-74. Removing the Dummy Cover
6. Remove the tape drive from its protective wrapper and place it on an
antistatic surface. Record the drive model and serial number.
7. Set any jumpers or switches in the tape drive. Refer to the installation
procedures that come with the tape drive.
Note:
All tape drives must have their terminators
removed.
8. Attach the device bay brackets, which were removed from the dummy cover
in step 5 above, to the tape drive. See Figure 4-75.
Note:
Use the screws supplied with the tape drive. Only
use the screws from the device bay brackets when there are
no screws provided with the tape drive package.
Figure 4-75. Attaching the Device Bay Brackets
A
B
Dummy Cover
Screws (2)
CRU Replacement and Server Upgrades 4-61