Installing A Pci Module - NEC Express5800 320La User Manual

Installing a PCI Module

1. Observe the safety and ESD precautions listed at the beginning of this
chapter.
2. Ensure that the locking handle on the front of the PCI module is in the up
unlocked position.
3. Support the PCI module with both hands and carefully slide it into the
chassis until it is firmly seated in its connector.
4. Swing the locking handle all the way down to its locked position.
Figure 4-49. Securing the Locking Handle of the PCI Module
5. Hand-tighten the knurled screw that fastens the locking handle to the PCI
module.
Note:
required to activate the interlock switch that allows power to
be applied to the PCI module.
6. Reconnect (if disconnected) all PCI cables and the network cable to the front
of the PCI module.
7. Close and lock the front door on the tower cabinet or front covers on the
rack-mount system. See Opening and Closing the Front Door of the Tower
Cabinet earlier in this chapter or Removing and Installing the Front Covers
of the Rack-Mount System earlier in this chapter.
4-38 CRU Replacement and Server Upgrades
Hand-tighten the knurled screw only as much