Device Module; Optional Components; Tape Drives; Monitor, Keyboard, And Mouse - NEC Express5800 320La User Manual

Device Module

The device module supports two standard PC AT compatible peripheral devices (see
Figure 1-11), as follows:
One IDE 3.5-inch high-capacity super floppy disk drive (supports 720 KB, 1.44 MB,
!
and 120 MB diskette media).
One 24X CD-ROM drive.
!
The device module is a single CRU that is not hot-pluggable.

Optional Components

Optional components are described in the following subsections.

Tape Drives

In the tower system only, two tape drive module bays are available for mounting
optional half-height 5.25-inch tape drives. As a prerequisite to installing the optional
tape drives an optional internal device bay kit must be installed first.
The tape drives are numbered 1 and 2, left to right as viewed from the front of the
system.

Monitor, Keyboard, and Mouse

The system does not require a monitor, keyboard, or mouse for most server
management functions other than the initial boot, system upgrading, or system
troubleshooting.
USB-compatible keyboard and mouse connectors are available on the rear of the
system.
Support for a colored VGA monitor is also available by using the VGA monitor
connector available on the rear of the system.
1-18 System Overview
A
B
C
A High-capacity super floppy disk drive
B 24X CD-ROM drive
C Device module
Figure 1-11. Device Module