NEC Express5800 320La User Manual page 170

Status Lamp
Error Message
Color State
CPU1 +5.0vsAlm00 Amber Blink
CPU1 +5.0vsAlm02 Amber Lit
CPU1 +5.0vsAlm07 Amber Blink
CPU1 +5.0vsAlm09 Amber Lit
CPU1 Broken Green
CPU1 FAN Alm 01 Amber Blink
CPU1 FAN Alm 02 Amber Blink
CPU FANvltAlm00 Amber Blink
CPU FANvltAlm02 Amber Lit
CPU FANvltAlm07 Amber Blink
CPU FANvltAlm09 Amber Lit
CPU1 Missing Green
CPU1 offline Green
CPU1 removed Green
CPU1 Temp Alm 00 Amber Blink
CPU1 Temp Alm 02 Amber Lit
CPU1 Temp Alm 07 Amber Blink
CPU1 Temp Alm 09 Amber Lit
CPU11 TempAlm 00 Amber Blink
CPU11 TempAlm 02 Amber Lit
CPU11 TempAlm 07 Amber Blink
5-16 Problem Solving
Table 5-1. LCD Error Messages (continued)
Suspected
Module
CPU module #1
CPU module #1
CPU module #1
CPU module #1
Blink CPU module #1
CPU module #1
CPU module #1
CPU module #1
CPU module #1
CPU module #1
CPU module #1
Blink CPU module #1
Blink CPU module #1
Blink CPU module #1
CPU module #1
CPU module #1
CPU module #1
CPU module #1
CPU module #1
CPU module #1
CPU module #1
Description
5-V power voltage alarm (lower limit)
Fatal 5-V power voltage alarm (lower
limit)
5-V power voltage alarm (upper
limit)
Fatal 5-V power voltage alarm
(upper limit)
CPU module failure
Cooling fan 1 alarm
Cooling fan 2 alarm
Voltage alarm (lower limit) of the
CPU module cooling fan
Fatal voltage alarm (lower limit) of
the CPU module cooling fan
Voltage alarm (upper limit) of the
CPU module cooling fan
Fatal voltage alarm (upper limit) of
the CPU module cooling fan
CPU not found
The CPU module has been logically
disconnected.
The CPU module has come off.
Temperature alarm (lower limit)
Fatal temperature alarm (lower limit)
Temperature alarm (upper limit)
Fatal temperature alarm (upper limit)
CPU#1 temperature alarm (lower
limit)
Fatal CPU#1 temperature alarm
(lower limit)
CPU#1 temperature alarm (upper
limit)
Action
Contact your service
representative.
Check if the internal fan is
clean and if the internal fan
cable is connected firmly. If
the same error message is
still displayed, contact your
service representative.
Contact your service
representative.
Activate the ft server utility, or
remove the module and then
mount it again. If the same
error message is still
displayed, contact your
service representative.
Check the module for a
removed screw, or remove the
module and then mount it
again. If the same error
message is still displayed,
contact your service
representative.
Check if the internal fan is
clean and if the internal fan
cable is connected firmly. If
the same error message is
still displayed, contact your
service representative.