Error Messages And Beep Codes; Lcd Error Messages - NEC Express5800 320La User Manual

Error Messages and Beep Codes

This section describes the LCD error messages, POST error codes and messages, and
the POST error beep codes.

LCD Error Messages

If the server system detects an error while operating (power on) or while the power is
off, it displays an error message on the LCD panel, see Figure 5-1. The LCD panel
provides 16 digits of alphanumeric characters that make up error messages for easy
viewing. Table 5-1 lists the LCD Error Messages. Included in the error messages are
actions for you to remove and replace certain Customer Replaceable Units (CRUs).
These actions are numbered to indicate the order in which to perform them. The CRUs
associated with the LCD error codes are shown in subsection LCD Error Code
Hardware References later in this chapter.
Status Lamp
Error Message
Color State
A
AC lost Alm 01 Amber Blink
AC lost Alm 02 Amber Blink
AmbientTempAlm00 Amber Blink
AmbientTempAlm02 Amber Lit
AmbientTempAlm07 Amber Blink
AmbientTempAlm09 Amber Lit
5-14 Problem Solving
Figure 5-1. Liquid Crystal Display Panel
Table 5-1. LCD Error Messages
Suspected Description
Module
Power unit #1 Alarm indicating that AC input has
not been detected
Power unit #2 Alarm indicating that AC input has
not been detected
Front panel Temperature alarm (lower limit)
Front panel Fatal temperature alarm (lower limit)
Front panel Temperature alarm (upper limit)
Front panel Fatal temperature alarm (upper limit)
CPU Missing
Action
Check the AC cable. If the
same error message is still
displayed, contact your
service representative.
Contact your service
representative.