NEC Express5800 320La User Manual page 118

1. Remove the appropriate PCI module from the server chassis. See Removing
a PCI Module earlier in this chapter.
2. Remove the two screws from the rear of the PCI module securing its top
cover. See Figure 4-39.
Figure 4-39. Removing the Two Screws Securing the Top cover of the PCI Module
3. Remove the top cover of the PCI module by sliding it slightly towards the
rear of the module until it stops and its hooks disengage from the tab slots in
the module chassis and then pull it straight up. See Figure 4-40.
Figure 4-40. Removing the Top cover of the PCI Module
4-32 CRU Replacement and Server Upgrades
Screws