Leaving A Message For Mailbox Owners - Siemens PhoneMail User Manual

2.3.1 Leaving a Message for Mailbox Owners

You can leave a message after the beep if the user whose mailbox you have dialed via guest access has enabled
the option to leave a message.
Control and correction options are available during the recording of the message (see
Recording Process", on page
Any pauses at the start or end of the recorded voice message are detected by the system and removed.
With cutting the connection the message is delivered to the dialed mailbox.
The following additional options are available during the recording process:
*
# # #
# # 0
You can also simply replace the handset after having left your message. The message will always be sent.
A31003-S2360-U106-2-7619, 2009-03-25
OpenScape Xpressions V6 PhoneMail, User Guide
Operating your Mailbox with OpenScape Xpressions PhoneMail
Dialing an external Mailbox (Guest Access or Universal Access)
47). You will hear a beep 15 seconds before the recording process is completed.
Stop recording, control functions during the recording process:
See Section 2.2.4.2, "During the Recording Process", on page
Dial a mailbox via guest access again to leave a message: push pound three times.
Connect to a user number or the operator:
push pound twice and then push 0.
Bedienung.fm
Section 2.2.4.2, "During the
47.
83