Inserting The Batteries - Silvercrest SL 80/2 100CI Operation And Safety Notes

Inserting the batteries

Open the battery compartment.
Insert two batteries in the battery compartment; observe proper polarity as
mentioned.
Push the cover of the battery compartment carefully until the cover is
locked.
The strap is for removing the batteries easily out of the battery
compartment. If you put the strap below the batteries when
inserting them, you can remove them by simply pulling the strap
carefully.
Replace discharging batteries on time. Otherwise, the sending
capacity of the remote control will be too low.
Always replace both batteries simultaneously and use batteries of
the same type.
Check the batteries of your remote control at least once a year.
If a battery has leaked, wear protective gloves and clean the
battery compartment with a dry cloth.
Caution!
Observe the disposal tips on page 7.
- 12 -