Text; Switch Between Tv And Sat; Switching Between Tv And Radio; Connecting External Storage Media - Silvercrest SL 80/2 100CI Operation And Safety Notes

By pressing the Exit key, you will leave the multi-picture mode. The channel
you marked last will appear as complete image on your screen.

Text

Teletext is an information system displaying Teletext on your TV set. For
Teletext reception, the selected channel must support this function. The TXT
symbol appears when channels are changed.
Press the Text key (21) to start Teletext.
For switching off Teletext
, press the Exit (9) or press the Text key (21) thrice.
You can use the Text key (21) to make the displayed video text
transparent. Press the Text key (21) several times to do this.
Using Fasttext functions
The coloured keys on the remote control are meant for Fasttext and are
activated after invoking another Teletext page. You can get there directly by
pressing the coloured keys on the remote control.
Press the desired key (17-20).

Switch between TV and SAT

With the "TV/SAT" key (5) you can switch between TV and satellite functions.
(This function has to be provided by your TV set).
Keep pressing the "TV/Radio" key until you have set the desired function.

Switching between TV and radio

With the TV/RAD key (4) you can switch between TV and the radio function.
Now, the receiver transmits a radio channel and shows a background image.
To return to the TV channel, press the "TV/RAD key (4) on the remote
control.

Connecting external storage media

You can create a connection to an external device of Mass Storage Device
class (USB stick or external hard disc (FAT 32)) by using the supplied USB
adapter cable Mini-A-plug on Normal-A- sockets. Other device classes are not
supported. Use only the devices which support the High Speed mode. Typical
devices of this Mass Storage Device Class are external hard discs (via USB),
USB Memory Sticks and Card Readers. If there are several partitions on the
hard disc, the first partition is used. The functionality of the receiver demands
the activation of the USB interface. That can take place after connecting the
external device through one of the following three actions:
• Switching the receiver off and on from the mains switch
- 90 -