Factory Default - Silvercrest SL 80/2 100CI Operation And Safety Notes

This function must be "On" to lock or unlock channels.
Change password (PIN)
You can change the factory-set password here and define a customised one.
Press the "OK" key (14). An input window appears.
Enter the current password (standard value 0000).
Enter the new customised password twice.
If entered correctly, the insert in the centre of the lower screen half will say
"PIN successfully changed".
If you forget the defined custom password, please contact our Service
Hotline.
Viewing age
You can set the minimum age between 6 and 18 years in this menu. If a
channel telecasts an age limit, you can restrict the watching of this channel.
Please remember that, even with the set minimum age, this function is
dependent on the transmitting station. If the transmitting station does
not telecast any minimum age, the protective function will not work.
Press the arrow keys left (10) or right (11) to change the setting.
or
Press the "OK" key (14). The displayed number is deleted and you can
define an age between 6 and 18 by using the numerical pad (3). You can
even switch off the minimum age if you do not use this function.

Factory default

To reach this sub-menu, you must enter a four-digit password. The default
password is 0000.
Select the item "Factory default" by using the arrow keys up (12) or down
(13) and press the OK key (14).
Enter the current password by using the numerical pad (3). A confirmation
window appears.
Press the OK key (14) to confirm the restoration of the factory default.
- 65 -