Silvercrest SL 80/2 100CI Operation And Safety Notes page 72

Select satellite
Press the arrow keys left (10) or right (11) to change the setting.
or
Press the "OK" key (14). A selection window appears.
Select the desired setting by using the arrow keys up (12) or down (13).
Confirm your selection by pressing the "OK" key (14).
Edit / Select TP
You can make a manual selection of the transponder. Various numbers of
transponders are preset according to the selected satellites.
Press the arrow keys left (10) or right (11) to select one of the preset
transponders.
or
Press the OK key (14) to reach the Transponders List editor.
Please read further under the item Transponder-List editor on page 44.
PID
You can select the PID of the transponder manually. You can select between
0 and 8191.
Enter the PID for it directly by using the numerical pad (3).
or
Press the arrow keys left (10) or right (11) to increase or decrease the PID
by one step.
Once all the settings have been made, the scanning can be started.
Press the red key (17) to start scanning.
or
Select the item "Start OTA" by using the arrow keys up (12) or down (13)
and press the OK key (14). The scanning begins.
To return to the "System Settings" sub-menu, press the menu key (8).
- 69 -