Osd Setup - Silvercrest SL 80/2 100CI Operation And Safety Notes

Connection with an S-Video Cable:
If you have connected the receiver and the TV set with an S-video cable, keep
the setting on YC.
Connection with a video cable:
If you have connected the receiver and the TV set with a video cable, keep
the setting on CVBS.

OSD Setup

In the "OSD Setup" sub-menu, you can change the timeout and the
transparency of the OSD.
With the OSD time-out, you set the time until the inserts (e.g. on changing the
channel) are hidden automatically.
The transparency setting makes the inserts more transparent or opaque
depending on the setting.
OSD timeout
Change the duration of the inserts (1 – 30 seconds).
Press the arrow keys left (10) or right (11) to change the setting.
or
Press the "OK" key (14).
Enter a number between 1 and 30 through the numerical pad (3).
Confirm your input by pressing the "OK" key (14).
OSD transparency
Change the transparency of the inserts (0 % - 50 %).
Press the arrow keys left (10) or right (11) to change the setting.
- 56 -